-
Looking for HSC notes and resources? Check out our Notes & Resources page
Gaming Computer (1 Viewer)
- Thread starter gettinbetter
- Start date
cheezcake
Callipygian Member
OC'ed my 2500k to 4.3GHz
Omnipotence
Kendrick Lamar
wow
MrBrightside
Brightest Member
- Joined
- Jan 18, 2010
- Messages
- 2,032
- Gender
- Undisclosed
- HSC
- N/A
My mum. -.- srs
jamesfirst
Active Member
- Joined
- Jan 30, 2010
- Messages
- 2,005
- Gender
- Male
- HSC
- 2011
did you wow at the fact that he overclocked it to 4.3 GHz?
I've seen people pull off 5GHz easily. Most average users get 4.5 GHz
All about the cooling.
MrBrightside
Brightest Member
- Joined
- Jan 18, 2010
- Messages
- 2,032
- Gender
- Undisclosed
- HSC
- N/A
Are 9 fans good enough for 5 GHz? i.e 2 x 200 mm fan at front and top, and rest are 120mm
jamesfirst
Active Member
- Joined
- Jan 30, 2010
- Messages
- 2,005
- Gender
- Male
- HSC
- 2011
Mate hyper 212 evo can allow 4.5 GHz to occur lolz.
iRuler
Premium Member
too many fans, imo lol but you can't really have too many
get liquid or get a better heat sink
MrBrightside
Brightest Member
- Joined
- Jan 18, 2010
- Messages
- 2,032
- Gender
- Undisclosed
- HSC
- N/A
the GPU had 3 smaller ones. and I added one to the side panel, the rest was stock, including the CPU cooler.
jamesfirst
Active Member
- Joined
- Jan 30, 2010
- Messages
- 2,005
- Gender
- Male
- HSC
- 2011
You can get them Noctua HSF. They are gooooooooooood
cheezcake
Callipygian Member
I seriously don't think you're going to find any practical difference in running @ 4.5GHz to 5GHz so just stick with the 4.5 for lower temps if you're still noob at OC'ing.
ohexploitable
hey
awwww it's so cute how you guys have just built your first pc :3
so much computer noobery ITT
so much computer noobery ITT
jamesfirst
Active Member
- Joined
- Jan 30, 2010
- Messages
- 2,005
- Gender
- Male
- HSC
- 2011
are you proud? Because it's not that hard. It's like a lego
MrBrightside clearly had trouble on his first build.
abbeyroad
Active Member
- Joined
- Mar 9, 2008
- Messages
- 891
- Gender
- Male
- HSC
- N/A
MrBrightside
Brightest Member
- Joined
- Jan 18, 2010
- Messages
- 2,032
- Gender
- Undisclosed
- HSC
- N/A
So besides from far greater viewing angles (without the picture degrading) and apparently slightly better colour quality, What else is the difference between IPS and TN panels?
I've read that TN panels are great for gaming due to their response times and colours, but I also read that IPS has improved greatly making it the superior choice for picture quality.
I've noticed that a lot of 3D LED's are using TN panels, most likely to cut down the costs such as the Samsung SA 950 23" and LG 3D series. - While this screens do not incorporate Nvidia's 3D solution, they use their own engines. - So they are like low end 3D Monitors, in other words. Any ways I'm not looking for a 3D monitor, I just wanted to make the point that most of them use TN panels as of 2011, most likely due to a compromise to even out the prices.
Now Is an IPS really that beneficial over TN panel? I will only be gaming from a straight angle, so far angle viewing is not needed for me. I was looking at the Dell U2412M 24" LED. I've heard complaints that it is very bright, but I presume this can be turned down. http://accessories.ap.dell.com/sna/...cs=audhs1&l=en&s=dhs&sku=230-12093&redirect=1
I have also seen samsung use their own technology to increase viewing angles on a TN panel. http://www.samsung.com/hk_en/consum...ype=consumer&subsubtype=series-7-and-9-3d-led My local retailer had this samsung screen and other TN panels. Not many shops actually sell monitors :/ The dell has a 8ms response time conpared to a 2ms of the TN is that noticeable?
he's a review of the SA950 http://www.youtube.com/watch?v=HdpiCxbubRs
LOL the SA950 has a higher contrast ratio than the dell ahahahaha and it's TN
I've read that TN panels are great for gaming due to their response times and colours, but I also read that IPS has improved greatly making it the superior choice for picture quality.
I've noticed that a lot of 3D LED's are using TN panels, most likely to cut down the costs such as the Samsung SA 950 23" and LG 3D series. - While this screens do not incorporate Nvidia's 3D solution, they use their own engines. - So they are like low end 3D Monitors, in other words. Any ways I'm not looking for a 3D monitor, I just wanted to make the point that most of them use TN panels as of 2011, most likely due to a compromise to even out the prices.
Now Is an IPS really that beneficial over TN panel? I will only be gaming from a straight angle, so far angle viewing is not needed for me. I was looking at the Dell U2412M 24" LED. I've heard complaints that it is very bright, but I presume this can be turned down. http://accessories.ap.dell.com/sna/...cs=audhs1&l=en&s=dhs&sku=230-12093&redirect=1
I have also seen samsung use their own technology to increase viewing angles on a TN panel. http://www.samsung.com/hk_en/consum...ype=consumer&subsubtype=series-7-and-9-3d-led My local retailer had this samsung screen and other TN panels. Not many shops actually sell monitors :/ The dell has a 8ms response time conpared to a 2ms of the TN is that noticeable?
he's a review of the SA950 http://www.youtube.com/watch?v=HdpiCxbubRs
LOL the SA950 has a higher contrast ratio than the dell ahahahaha and it's TN
Last edited: