MedVision ad

Unblocking ports (1 Viewer)

elfanger

Member
Joined
Oct 16, 2003
Messages
40
Can someone pelase tell me how to unblock ports on my adsl modem/router (netcomm NB1300+4). I am trying to use torrent but it says i will have terrible performance due to the port not functioning to its full potential. Thanks.

Screenshot of the error is attached.
 
Last edited:

equiski

Member
Joined
Jul 28, 2004
Messages
482
Gender
Undisclosed
HSC
1999
I have the same modem. This is the process if you have not changed the default values.

1: Go to the start menu and click "run".

2: type in "ipconfig" and press enter. Take note of the "IP Adress", this is your local adress as your modem acts as a router as well. We'll use this number later.

2: Go into your internet browser and type "192.168.1.1"* into the address bar and hit enter

2: The default user name is "admin" and the password is "password"

3: Click "Advanced settings"

4: Click "Post fowarding"

5: Enter "6881"** into the "Public Port - Start", "Public Port - End" and "Private Port" fields. Select the "TCP" button. Enter your computer's local IP address (the one we got from the command prompt) into the "Host IP Address" and click Add.

6: Repeap step 5, but select UDP instead of TCP.

7: After adding both those ports, select "Save Settings and Reboot" from the side bar. The modem will restart and bittorent should work alot faster.

* If this doesn't work the correct number can be found in the Ipconfig dialogue as "Default Gateway"

** This is the default port, if you have changed it in the azureus config, just use that number.
 

equiski

Member
Joined
Jul 28, 2004
Messages
482
Gender
Undisclosed
HSC
1999
Also...

Limit your outgoing data rate to about 80% of your upload bandwidth. This is assuming you have a asymetric connection (Like 256/64 or 512/128).

If you plan on doing anything illegal, download the Safeguard plugin to protect yourself from known spying IP's. I don't condone such activities, though.
 

equiski

Member
Joined
Jul 28, 2004
Messages
482
Gender
Undisclosed
HSC
1999
No problems, I hope it worked out for you.
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top